GGP ITALY MP 24 Li Operator'S Manual Download Page 20

EN - 6

Warning!

 Read the instructions 

before operating the machine.

Warning! 

Failure to use this 

machine correctly can be 

hazardous for oneself and others

Danger! Do not leave the machine 

in the rain (or in damp conditions).

Danger! Always wear 

the gloves when use

the chain saw.

Warning!  Beware of 

falling objects.

Keep bystanders away.

Danger! 

Electrocution hazard.

Keep at least 10 m away

from overhead lines.

Danger! Always wear head and

eye protection..

Danger! 

 Wear non-slip 

safety footwear.

.

Danger! Always wear ear 

and eye protection.

 IMPORTANT 

  Any damaged or illegible 

decals must be replaced. Order replacement 

decals from an authorised service centre.

 3.3  IDENTIFICATION LABEL

The identification label holds 

the following data (fig. 1):

1.  Sound power level

2.  CE conformity marking

3.  Year of manufacture

4.  Type of machine

5.  Manufacturer’s reference model

6.  Serial number

7.  Name and address of Manufacturer

8. 

Article code

9. 

Guide bar lenght

Write the identification data of the 

machine in the specific space on the 

label on the back of the cover page.

 IMPORTANT 

  Quote the information on 

the product identification label whenever you 

contact an authorized service workshop.

 IMPORTANT 

  The example of the 

Declaration of Conformity is provided 

on the last pages of the manual.

 3.4  MAIN COMPONENTS

The machine is composed of a series 

of main components that have the 

following functions (fig.1):

A.  Motor: supplies the drive power 

to the cutting means.

B.  Comands rod: is fitted with 

the main switch controls..

C.  Rear handgrip: support handgrip located 

on the rear of comands pole. This should 

be grasped using the right hand. 

D.  Front handgrip: support handgrip 

located on the rod commands. This 

should be grasped using the left hand.

E. 

Pruner device:

. device designed to 

limbing and draining of trees.Is supplied 

already mounted on the pole.

F.  Harness: 

cloth belt that passes over 

the shoulder, helps support the weight 

of the machine while working. May only 

be used with the extension pole.

G.  Guide bar: supports and 

guides the toothed chain.

H.  Toothed chain: cutting element, 

consisting of drive links fitted with 

small blades called "teeth" and side 

connections held in place by rivets.

I.  Chain restraint pin: safety  device that 

prevents uncontrolled movements of the 

toothed chain should it break or slacken.

J. 

Extension tube: element that allows to 

increase the length of the machine.

K. 

Bar cover guard

: chain saw cover on 

the guide bar to be fitted during handling, 

transportation or storage of the machine.

L. 

Battery

: (if it is not supplied with the 

machine, see chapter 15 “Accessories 

on request”) device that supplies 

electric current to the tool; its 

specifications and regulations for use 

are described in a specific manual.

M. 

Battery charger

: (if it is not supplied 

with the machine, see chapter 15 

“Accessories on request”) device 

used to recharge the battery.

4.  ASSEMBLY

The safety regulations to follow 

are described in chap. 2. Strictly 

Summary of Contents for MP 24 Li

































Reviews: