Before Putting Into Use
These instructions for use are intended for the user.
They describe the appliance and correct operating
procedures for safe use.
Instructions for Use
SAVE THESE INSTRUCTIONS:
Before connecting the appliance to electrical power
supply, leave it to stand for about 2 hours, which will
reduce the possibility of malfunctions in the cooling
system due to transport handling.
Clean the appliance thoroughly, especially in the
interior(See Cleaning and Maintenance).
In case the interior accessories are not correctly
placed, rearrange them as described in chapter
“Description of the Appliance”
If the gasket is damaged or the door seal is
poor, energy consumption is substantially
higher. To restore efficiency, replace
the gasket.
Always consider instructions stated in
sections Positioning and Energy Saving
Tips, otherwise the energy consumption is
substantially higher.
Remove shipping bracket at base of
door opening and replace the foot
before operating this appliance.
TIPS for Energy Saving
Try not to open the door too often, especially when
the weather is hot and humid. Once you open the
door, close it as soon as possible. This is especially
important if you have an upright model.
Every now and then check if the appliance is
sufficiently ventilated (adequate air circulation
behind the appliance).
Set the thermostat from higher to lower settings as
soon as possible(depends on how loaded the
appliance is, ambient temperatures etc).
Ice and frost layers increase energy consumption,
so clean the appliance as soon as frost layer is
3-5 mm thick.
2
Summary of Contents for MBKX Series
Page 1: ...Model No MBKX series ...
