6
TROUBLESHOOTING
No problem
Cause
correction
1
Machine not work Check the electric power on or off,
see the fuse whether burn, miss
phase or neutral wire not install well.
Reinstall the wire
2
Not Heating
contactor failure, or the wire loose
Reinstall the contactor or have
wires tightened
Time relay failure
Adjust it or reset it
Panel not work well or the
temperature sensor failure
Adjust it or reset them
3
Heating slowly
Weak or burnt out element
Reset the element(checked by
multi-meter)
Elements not meet well
Adjust the wire’s contact
4
Not
controlling
temperature
automatically
Temperature sensor failure
Mend it or reset it
Circle not contacting well
Adjust the wire’s contact
5
Not timing
Circle not contacting well
Adjust the wire’s contact
Time Controller not work
Reset the controller
6
Operating pressure
too high
Deadweight clogged
Turn unit off and allow fryer
to cool to release pressure
from
frypot;
remove
deadweight and clean ,per
cleaning the deadweight valve
section
Exhaust line to stack clogged
Clean Exhaust line to stack
7
Pressure does not
build or too low
Pressure gauge failure
Reset it, don't mend it
Solenoid valve leaking or not closing
Have solenoid valve checked
or cleaned
Lid gasket leaking
Reverse gasket or lid needs
adjusted
Lid open or not latched
Close and latch lid
Product not fresh or not enough
product in fryer
Place proper quantity of fresh
product
within
frypot
to
generate steam
Metal shipping spacer not removed
from deadweight
Remove shipping spacer
