GGM GUF Series, Operation Manual, Page: 5 / 20

6. Product characteristics
1. Stable speed control ( Speed ripple: 0.5% )
The product adjusts the current applied to the
motor through vector control by constantly
comparing the set speed with the speed
feedback signal from the motor, enabling
stable rotation speed from low speed to
high speed even if the load changes.
2. Wide speed control range
Speed : 100 ~ 4000 r/min
3. Simple connection
•
The motor connector can
be wired simply.
•
Connect the lead wire to
the power connector
using the screw driver.
•
Connect the lead wire to
the I/O connector by pressing the button.
4. Simple use ( front panel )
5
•
Run and stand-by control
Operate the product simply
by using the operation
switch.
•
Rotational direction control
Change the rotational
direction of the motor using
the rotational direction switch.
•
Speed control
The speed can be easily
controlled and various
functions executed using the
speed control buttons.
5. Operation by external I/O ( PLC, etc. )
Start/Stop, change of rotational direction,
multi-level speed operation by external I/O,
etc.
6. Display indication
(load ratio, actual speed, etc.)
Display of load ratio
(100%)
Display of actual speed
(1500rpm)
7. Multi-level speed operation ( 8 speeds )
8-speed operation is available by setting data
to operation data No.0 ~ No.7.
8. Setting/operation lock
( Prevents speed or data changes )
- Set the Lock function: Press and hold down
the (S) button for 5 seconds or longer.
- Cancel the Lock function: Press and hold
down the (S) button for 5 seconds or longer.
9. Protection function
The product is equipped with a function that
enables it to detect abnormal status such as
overload and overvoltage.
If an abnormality is detected, operation will
stop and an alarm will occur.
7. Applicable Motor
Item name
Rated output
Rated torque
Rated output current
Rated rotation speed
K6F□30NC
30W
0.1 N.m
0.17 A
K8F □ 60NC
60W
0.2 N.m
0.43 A
K9F □ 150NC
150W
0.49 N.m
0.95 A
K10F □ 200NC
200W
0.65 N.m
1.60 A
K10F □ 400NC
400W
1.3 N.m
2.30 A
3,000 r/min
*
□ : SHAFT SHAPE ( S : STRAIGHT, H : PINION )