GB - 1
Safety PrecautionS
caution
inViSiBLe LaSer raDiation WHen
oPen anD interLocKS DefeateD.
aVoiD eXPoSure to BeaM.
the lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence
of
uninsulated “dangerous
voltage”
within the product’s enclosure that may
be of sufficient magnitude to cause an
electric shock.
the exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in this owner’s manual.
WarninG
to reDuce tHe riSK of eLectric SHocK, Do not reMoVe
coVer (or BacK). no uSer-SerViceaBLe PartS inSiDe. refer
SerVicinG to QuaLifieD SerVice PerSonneL.
to PreVent fire or SHocK HaZarD, Do not eXPoSe tHiS
aPPLiance to rain or MoiSture. Do not PLace oBJectS
fiLLeD WitH LiQuiDS on or near tHiS unit.
caution
uSe of controLS or aDJuStMentS or PerforMance of
ProceDureS otHer tHan tHoSe SPecifieD May reSuLt in
HaZarDouS raDiation eXPoSure.
DanGer of eXPLoSion if Battery iS incorrectLy rePLaceD.
rePLace onLy WitH tHe SaMe or eQuiVaLent tyPe.
to PreVent eLectric SHocK, MatcH WiDe BLaDe of PLuG to
WiDe SLot of PoWer outLet, tHen fuLLy inSert.
tHiS cLaSS B DiGitaL aPParatuS coMPLieS WitH canaDian
iceS-003.
* See BottoM of unit for GraPHic
SyMBoLS*
on Placement
•
Do not use the unit in places that are extremely hot, cold, dusty, or humid, use it in moderate climates.
•
Do not restrict the ventilation openings of the unit by covering it with items such as newspaper, tablecloths,
curtains, etc.
on Safety
•
When connecting or disconnecting the AC adapter, grip the plug and not the cord itself. Pulling the cord may
damage it and create a hazard.
•
When you are not going to use the unit for a long period of time, disconnect the AC adapter.
•
No un-covered flame sources such as lighted candles should be placed on the AC adapter or the unit.
on condensation
•
When left in a heated room where it is warm and damp, water droplets or condensation may form inside the
unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to
2 hours before turning the power on, or gradually heat the room and let the unit dry before use.
rating Plate Location
•
The rating plate is located on the bottom of unit.
fcc Statements
note: this equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference
in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. if this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
this product contains a
low power laser device.