
GB - 15
this owner’s manual explains the basic instructions
for operating this unit. Some DVDs are produced in
a manner that allows specific or limited operation
during playback. therefore, this unit may not respond
to all operating commands. tHiS iS not a Defect.
Please refer to the instructions accompanying the
specific DVD in question for more information about
the options available on that DVD.
“
” may appear on the screen during operation. a “
” means that the desired operation is not permitted
by the unit or disc.
PLayinG a DiSc
Basic playback
Playing a Disc
1. Slide the StanDBy / on switch to the on position.
(Slide the on / off switch on the monitor to the on
position.)
See cuStoMiZinG tHe function SettinGS before
proceeding to step 2.
2. Press the oPen button and hold the front panel to
open the disc door.
3. Hold the disc by its sides and gently push it onto the
spindle with label side facing towards you until you
hear a “click”.
4. Gently push the disc door closed. it takes a short
while for your unit to load the disc. after loading,
for most DVDs, the unit will automatically take you
main menu or start playing. if the unit does not
automatically start playing the DVD, press the
PLay button.
Pausing Playback (Still Mode)
Press the PauSe button. to resume normal playback,
press the
PLay button.
each time you press the PauSe button, the picture
advances one frame.
Stopping Playback
Press the
StoP button at the location where you
want to interrupt playback. to resume playback at the
position where the disc was stopped, press the
PLay
button.
if you press the StoP button twice, the unit’s memory
will be cleared and pressing the
PLay button will
reset the disc to the beginning.
fast forward / fast reverse
1. Press the SearcH
or
SearcH button when a
disc is playing. each time you press the SearcH
or
SearcH button, the playback speed changes
in the following sequence:
2. Press the
PLay button when you reach the desired
point to resume normal playback.
notes:
• The DVD player mutes sound and subtitles during
reverse and forward scan of DVDs.
• The fast playback speed may differ depending on
the disc.
Skip (forward / reverse)
• Press the
PreV button to go back to current or
previous chapters/tracks.
• Press the
neXt button to advance chapters/
tracks.
• For audio CDs, use the number buttons on the
remote control to jump immediately to the desired
track number.
audio Selection
on some DVDs, the sound is recorded in two or more
formats. follow the directions below to select the
preferred language and sound system.
1. While a disc is playing, press the auDio button to
show the current audio format number.
2. Press the auDio button repeatedly to select the
desired audio format.
notes:
• If only one audio format is recorded on the DVD, the
number does not change.
• Some DVDs allow you to change audio selections
only via the disc menu. if this is the case, press the
Menu button and choose the appropriate language
on the disc menu.
• You can select different audio channels (Stereo, Left
or right) on an audio cD by pressing the auDio
button repeatedly.