di gianfranco conti - 20021 Bollate (MI) ITALY - Viale Lombardia, 18 - Telefono (02) 38302386 r.a. - Telefax (02) 38302389
Rev. 0/96
ENGLISH
Pag. 5 di 9
2 - TECHNICAL CHARACTERISTICS
2.1 - Technical characteristics and performance
Performance
Variable cycles length, according to bending necessities of frames
VAVA
VISPA
VISPA UP
Voltage
Volt
230
230
230
Frequency
Hz
50
50
50
Installed power
W
1200
450
450
Fuse
A
5
2
2
Machine weight
kgs
2
1.8
1.8
2.2 Overall dimensions
Dimensions
VAVA
VISPA
VISPA UP
Machine length
mm
160
100
100
Machine width
mm
100
260
110
Machine height
mm
220
110
270
3 - INSTALLATION
3.1 - Setting up
The machine is supplied already assembled and ready for operation.
The packaging includes:
a) the machine
b) feed cable
c) operating instructions
N.B. - With regard to VISPA and VISPA UP the feed cable is connected directly to the machine.
Owing to its particular nature, the machine can be handled manually without necessitating further
devices.
3.2 - Connection and starting
Once the machine is positioned, and after having assured that general switch is OFF, the feed cable
may be connected, first directly to side of machine, and subsequently to the mains.
4 - OPERATION AND USE
4.1 - Operation
The machine is positioned on a table in front of the operator. The apparatus is turned on in order to
start heating a frame.
Please remember that, after use, the machine must be turned off.
4.2 - Operator
The operator starts up the machine for the necessary time to carry out the operation, subsequently
stopping it.
