5
Signet 5500 Flow Monitor
9.1 VIEW
Menu
Flow & resettable total
Permanent total
Last calibration
Loop output
Press keys in sequence,
A.
B.
B.
C.
A.
OPTIONS =
OPTIONS =
To reset
total press:
ENTER
ENTER
To reset
total press:
Range
(display shows: )
OR
Relay 1
Relay 2
Aux output
quick
press
To exit without changes:
(sec. 9.3I)
(sec. 9.3I)
A.
B.
C.
D.
E.
F.
G.
H.
Choose: Change:
Save:
H↓
A↑
1
2
3
Menus:
• VIEW menu
(sec. 9.1): The VIEW menu is displayed during
standard operation. The operator can navigate freely through the
menu by pressing either UP or DOWN arrow keys. The VIEW
menu also offers a resettable totalizer feature that allows the
operator to reset the displayed total at the press of a button.
• CALIBRATE Menu
(sec. 9.2): The CALIBRATE menu contains
all critical display setup and output parameters. A simple security
code feature prevents unauthorized tampering. The operator is
required to enter a simple access code for menu access. The
same code also unlocks OPTIONS menus.
• OPTIONS Menu
(sec. 9.3): The OPTIONS menu contains setup
and display features that are seldom accessed for minor display
or output adjustments.
ENTER
OPTIONS
(sec. 9.3)
CALIBRATE
(sec. 9.2)
VIEW
(sec. 9.1)
2
seconds
5
seconds
Press & hold ENTER key
for menu
access:
Menu Displays A - H:
(Factory default displays shown)
A. Flowrate and resettable total display: Can be
reset by the front panel keypad or by remote
reset switch (sec. 5). A simple access code
feature prevents accidental total reset,
when enabled (sec. 9.3 I). External reset
switch inputs override security feature, when
enabled.
B. Permanent total display: Records volumetric
fl
ow total for the life of the product and is
non-resettable.
C. Loop output display: Shows the current
output level at the rear terminals.
D. Flow Range display: Shows the programmed
min and max meter range (sec. 9.2 B)
E. Relay 1 display: This display shows the
programmed operation mode and setpoint
for relay 1 (sec. 9.2 F-I)
F. Relay 2 display: This display shows the
programmed operation mode and setpoint
for relay 2 (sec. 9.2 F-I).
G. Aux output display: This display shows the
programmed operation mode and setpoint
for the auxiliary output (sec. 9.2 J-M).
H. Last calibration: This display shows a user-
de
fi
ned setup date for maintenance records.
This feature is not an internal timer or
calendar.
9. Menu
Functions
To access either CALIBRATE or OPTIONS menus, press and hold
the ENTER key as illustrated below:
