GF PORTAFLOW 330, Instruction Manual

Page: 18 / 56

Instrction manual Operating Procedures
17
6.3 Installing the Data Logging Software
The supplied USB memory key contains a copy of the Portagraph program (together with user
manual) which is used to display and save the logged data using a Microsoft based PC. The
manual should be copied to a PC and the Portagraph software installed before the system is
used to log data. A file on the USB key contains the instructions for installing the application.
Contact your local GF partner if the computer to be used is Apple based.
7 Operating Procedures
Initial instrument setup
Battery charging, Set date/time, Language, Backlight
Connect and take basic flow readings
At a one-off location At a frequent location Manage site details

QUICK START

VIEW EDIT SITE DATA
Set up a named site
Rename a site

Enter data

Choose site /
check/edit data

Attach sensors

Attach sensors

FLOW READING

FLOW READING
Carry out any necessary calibration
How to adjust the Calibration Factor
How to adjust the Roughness Factor
How to adjust the Damping Factor
Set-up a monitoring or logging application
Configure the
interfaces/outputs
How to measure totalised flows
How to set up basic (manual) logging
How to set up auto-timed logging
How to download logged data
4-20mA ON/OFF
4-20mA Calibration
Pulse ON/OFF
Pulse calibration
Pulse frequency mode
Pulse frequency calibration