Operating instructions GF 500
1 Safety instructions
3
1
Safety instructions
The GF 500 Butt Fusion Machine (hereinafter referred to as GF 500) is
designed according to the latest standards of technology. Using it for
purposes other than those described in this manual may cause injury to
the operator or to others. It may also cause damage to the machine or
other equipment.
Any person in the company, who is involved in the assembly,
disassembly, reassembly, installation, operation or maintenance
(inspection, maintenance work, repair work) of the GF 500, must have
read and understood the complete instruction manual, and in
particular Section 1 on “Safety instructions”.
It is recommended that the user has this confirmed in writing.
Thus:
•
The machine should only be used when in perfect working order.
•
Always follow the safety instructions.
•
Complete documentation should be kept in the vicinity of the
machine.
1.1
Proper use
The GF 500 is to be used exclusively for the fusion of pipes and fittings
made of PE, PP and PVDF.
1.2
General safety measures
•
Use only the materials and dimensions specified in this manual. Other
materials may only be used after consulting Georg Fischer Omicron
after-sales service.
•
Use only original Georg Fischer Omicron spare parts and equipment.
•
Inspect the GF 500 daily for visible signs of damage or defects. Have
damage or defects repaired immediately.
•
Any work on the electrical equipment may only be done by a
specialist.
