TS 5000 ISM BG
GB 4
Mounting and securing
X
Mark out and drill fixing holes for door closer and guide rail using fitting template or cut M5 thread
if necessary.
6.2 Mount guide rail and end caps
Fig.: 6.2.1
X
Align spacers on moving and fixed-leaf guide rails (
1.
).
X
Fix guide rails in place (tightening torque: 2 Nm) (
2.
).
X
Align end caps on moving leaf and screw on (
3.
) (tightening torque: 2 Nm).
X
Slide on cover at fixed leaf (
4.
)
X
Mount door closer and sliding lever according to the mounting instructions (
5.
).
All screwing torques are to be adjusted on site, if necessary.
6.3 Connecting wire cable to trigger
Fig.: 6.3.1
X
Unscrew set screw and lock nut 12 mm at clamping part (
1.
).
X
Suspend ball on wire cable in the trigger lever (
2.
).
X
Guide wire cable into funnel (
3.
).
X
Thread clamping part onto wire cable (
4.
).
X
Insert clamping part and thread wire cable through oblong hole (
5.
).
X
Push wire cable redirection onto wire cable (
6.
).
