Slimdrive EMD/EMD-F
4
Introduction
1.5 Terms
Term
Explanation
Hinge side
The side of the door where the hinges from which the door leaf is suspended are located.
Usually that side of the door located in the opening direction.
Opposite hinge side
The side of the door facing the hinge side. Usually that side of the door located in the
direction of closing movement.
Active leaf
The active leaf of a double leaf door. When the door is used, the active leaf must open
as the first door leaf and close as the last door leaf.
Passive leaf
The secondary leaf of a double leaf door. When the door is used, the passive leaf may
not open until the active leaf has left the closing position and must close again as the
first door leaf.
Activation device inside (KI)
Push button, switch or movement detector for activating the drive unit.
The activation device is located within the room enclosed by the door.
Activation function in the AUTOMATIC and EXIT ONLY modes of operation.
The activation device does not have any function in the NIGHT/OFF mode of operation.
Activation device outside (KA) Push button, switch or movement detector for activating the drive unit.
The activation device is located outside the room enclosed by the door.
Activation function in the AUTOMATIC mode of operation. The activation device does
not have any function in the EXIT ONLY and NIGHT/OFF modes of operation.
Activation device
authorised (KB)
Access control function (for example key switch or card reader) used by authorised
persons to activate the drive unit.
The activation function is active in the AUTOMATIC, EXIT ONLY and NIGHT/OFF modes
of operation.
Activation device with current
impulse function
Push button for opening and closing the door. Activation function only in the AUTO-
MATIC and EXIT ONLY modes of operation. The door is opened automatically when
the button is first pressed and closed again automatically when the button is pressed
the second time. The function can be activated during commissioning by parameter
setting using the display programme switch, ST 220 or GEZEconnects. If the activation
device is connected to the passive leaf control unit by means of the “current impulse”
function, both door leaves open when activated, even when the passive leaf control
system is deactivated.
Push&Go
When the door is pressed manually out of the closing position with an activated Push
& Go function in the AUTOMATIC mode of operation, the door opens automatically
as soon as a specific adjustable opening angle is exceeded.
Opening safety sensor (SIO)
Presence detector (e.g. active infrared light sensor) for protecting the swivelling range
of the door in the opening direction. As a rule the sensor is located on the hinge side
of the door on the door leaf.
Closing safety sensor (SIS)
Presence detector (for example active infrared light sensor) for protecting the swiv-
elling range of the door in the closing direction. As a rule the sensor is located on the
opposite hinge side of the door leaf.
Emergency stop button
Self-locking switch with which immediate stopping of the drive unit can be triggered
in case of danger. The drive unit remains in its current position until the user unlocks
the emergency stop switch again, thus terminating the emergency stop situation.
Low-energy function
The Slimdrive EMD can be used as a low-energy drive.
In low-energy function the force needed for opening and closing the door is reduced
to 67 N and the opening and closing time is reduced. This lowers the danger of a per-
son bumping into the moving leaf.
If people who are particularly vulnerable pass through the door, special measures must
be taken to eliminate the contact hazard (e.g. use of open/closing safety sensors).
Summary of Contents for Slimdrive EMD-F-IS
Page 19: ...Slimdrive EMD EMD F 19...
