GEZE Slimdrive EMD-F-IS Original Operating Instructions Download Page 11

Slimdrive EMD/EMD-F

11

Description

Additional door functions

Which switch/push button? 

What does the switch/push button do?

Emergency stop switch

The door stops immediately (in every mode of operation) 

and holds the position until the emergency stop switch 

is unlocked.

Key switch of the display programme switch

If a key switch is connected to the display programme 

switch, the operation of the display programme switch 

can be locked or released with it.

Activation device authorised (KB) (e.g. outside key switch) Door opens once and closes after the hold-open time. The 

set mode of operation is retained.

Switch function

The automated door can be activated using the switch 

function.

Normal switch function:

 

à

Switch contact opens the door and the door remains 

in the open position.

 

à

Switch contact closes the door.

Switch function with hold-open time:

 

à

Switch contact opens the door.

 

à

Switch contact closes the door or the door starts to close 

after the hold-open time.

Double push button

In the case of 2-leaf drives, a button with a double func-

tion can be connected via a push button for which param-

eters can be set. This means that 1-leaf or 2-leaf opening 

is possible by pressing the push button. 

If the push button is pressed once, only the active leaf 

opens and closes after the hold-open time has expired. 

If the button is pressed twice within 1.5 s, both leaves open 

and close after the double leaf hold-open time has expired.

Emergency lock

When the emergency lock is used, a switch can close the 

1- or 2-leaf system immediately. The doors close with the 

set force and without safety sensors and obstacle detec-

tion. There is an increased risk of injury.

WC control

The door opens after the elbow switch on the outside 

of the toilet has been pressed, and closes automatically 

after the set hold-open time has passed. 

When the push button is activated inside the toilet cabin, 

the system is switched to the exit only mode of operation, 

which means the outer push button no longer opens the 

door. At the same time, the lights indicate that the toilet 

is occupied. 

The electric strike is supplied with current, preventing 

manual opening of the door from outside. 

Activating the “inner” push button again or through man-

ual opening from inside, the WC function (exit only mode 

of operation) is cancelled and the drive switched back 

to the automatic mode of operation. 

The ‘occupied’ displays and lights go out.

Summary of Contents for Slimdrive EMD-F-IS





















Reviews: