GEZE hold-open system FA GC 150
12
Technical data
4
Technical data
4.1 Hold-open system FA GC 150
Protection rating (according to DIN EN
61140)
I
TS 4000 R, TS 4000 RFS
TS 4000 R-IS, TS 5000 RFS KB
Slimdrive EMD F/R*
Slimdrive EMD F/R-IS*
Powerturn F/R*
Powerturn F/R-IS*
Powerturn F/R-IS/TS*
II
RSZ 6, RSZ 7 (if automatic swing
door drives are used as a hold-open
device, they are connected up as
protecting rating I devices) TS 5000
R, TS 5000 RFS
TS 5000 R-ISM /G/S/0
TS 5000 R-ISM EFS
IP rating (in accordance with DIN 60529)
IP20, only for dry areas
Ambient temperature
-5 °C to 50 °C
4.2 Guidelines
DIBt Guidelines:2015
DIN EN 14637:2008-01
DIN 14677:2011-03
DIN 18263-4:2015-04
General requirements and test regulations for the approval proce-
dure for hold-open systems - version September 2015
Locks and building hardware - electrically controlled hold-open sys-
tems for fire/smoke protection doors - requirements, test methods,
application and maintenance
Servicing of electrically controlled hold-open systems for fire and
smoke protection closers
Locks and building hardware - door closers with controlled locking
structure - Part 4: Swing door drives with self-closing function
DIN EN 54-4:1997-12
Fire detection and fire alarm systems - Part 4: Power supply equipment
DIN EN 54-5:2001-03
Fire detection and fire alarm systems - Part 5: Heat detectors - point detectors
DIN EN 54-7:2006-09
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point
detectors using scattered light, transmitted light or ionisation
DIN EN 54-18:2005-12
DIN EN 54-25:2008-06
DIN EN 1155:2006-06
DIN EN 62368-1
VDE 0868-1:2016-05
DIN EN 60950-1:2014-08;
VDE 0805-1:2014-08
DIN EN 61000-6-2:2016-05;
VDE 0839-6-2:2015-05
DIN EN 61000-6-3:2011-09;
VDE 0839-6-3:2011-09
Fire detection and fire alarm systems - Part 18: Input/output devices
Fire detection and fire alarm systems - Part 25: Components which use
high-frequency connections
Locks and building hardware - electrically controlled hold-open
mechanisms for swing doors - requirements and test methods
Audio/video, information and communication technology equipment-
Part 1: Safety requirements
Information technology equipment - Safety - Part 1: General requirements
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards
- Interference immunity for industrial sectors
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards
- Interference immunity for residence, business and commercial sectors
as well as small-sized business
ETSI EN 300 220-2, V3.1.1,2017-02
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment to be used in the 25 MHz to 1 000 MHz
frequency range with power levels ranging up to 500 mW;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive
ETSI EN 301 489-1, V1.9.2:2011-09
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements
4.3 Power supply
Power supply
- Cable length 230V / 24V
- Cable length 230V / 24V
- Cable length 230V / 24V
130 mm / 150 mm (ID 085391)
90 mm / 65 mm (ID 103354)
700 mm / 750 mm (ID 115818)
Input voltage
230 V AC, +10 % / -15 %, 50 Hz
Input current
maximum 80 mA
Output voltage
24 V ± 0,5 V DC
Output current
maximum 260 mA
