GEZE EC Drive Operation & Maintenance Manual Download Page 7

 

                                  Operational Switches 

 

Operation of Settings 

 

This type of programme switch carries out various functions. They are; select mode of 
operation, view error messages and programme and service the system. The modes of 
operation are as follows.  

 

Automatic Mode ( Au ) 

Whilst in this mode the door will be activated automatically by the relevant form of sensor 
fitted i.e. Radar, Push Pad etc. The door will power open, stay open for a designated time 
( normally 1 to 5 seconds ) and then power close. There is also a possibility to open the 
doors to a reduced distance ( Winter Setting ). This is achieved by pressing the 

Automatic

 and 

Hold Open

 buttons at the same time. A small red LED is illuminated 

above the snowflake whilst the door is in Winter Setting. To return to the summer setting 
repeat the process of pressing 

Automatic 

and 

Hold Open 

at the same time. 

 

Hold Open Mode ( Ho ) 

Whilst in this function the door will power open and be held permanently open. 

 

Night Mode ( ni ) 

Whilst in this mode the drive unit is off. All activation and safety devices are isolated once 
the door is fully closed. If an integrated electric lock is fitted, this will be engaged 
automatically to secure the doors ( if fitted ). 

 

Exit Only ( Eo ) 

Whilst in this mode the external activation device is isolated. The internal activation device 
is still active. This enables traffic to leave the premises at closing time.  

 

Program Switch

 

Press simultaneously

for winter setting

Press once for

automatic

hold open

Press once for

Press once for

one way traffic

night mode

Press once for

Red LED

Au

LED Display

Service Indicator

 

IMPORTANT NOTICE 

If manual locks are fitted to the door leaf, please ensure they are 

UNLOCKED

 prior to 

switching the drive unit into one of the operational modes. Also switch the drive unit to 

NIGHT MODE

 before locking the door. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

       

                           

                                  

GEZE UK Ltd is part of the GEZE Worldwide Group of Companies 

Summary of Contents for EC Drive













Reviews: