27
2.4.4
Complete the configuration table
Once you have discussed the configuration with the operator:
➮
Complete the configuration table found in the Appendix.
2.4.5
Summary of the jumper settings
Jumper XB1 on the main circuit board
(also see Section 2.4.1 Alarm group)
Alarm contacts Alarm, Fault and
Window Open
(also see Section "Connecting alarm contacts for Alarm, Window Open and Fault" on
the previous page)
Jumper
Position
Function
XB1
(red)
"
Auf
"
(open)
With alarm from the alarm group:
Drives in "
Auf
" (opening) direction
With "
Zu/Reset
" (close/reset):
Drives in "
Zu
" (closing) direction
XB1
(red)
"
Zu
"
(close)
With alarm from the alarm group:
Drives in "
Zu
" (closing) direction
With "
Zu/Reset
" (close/reset):
Drives in "
Auf
" (opening) direction
Jumper
Position
Function
(1) (black)
left
Alarm contact acts as make (NO) contact.
(1) (black)
right
Alarm contact acts as break (NC) contact.
(2) (black)
left
Window Open contact acts as make (NO) contact.
(2) (black)
right
Window Open contact acts as break (NC) contact.
(3) (black)
left
Fault contact acts as make (NO) contact.
(3) (black)
right
Fault contact acts as break (NC) contact.
