26
Connecting alarm contacts for Alarm,
Window Open and Fault
There are 3 floating (potential-free) alarm contacts for output signals:
Alarm, Window Open
(optional, cannot be retrofitted) and
Fault
.
You can connect signal lamps, audible alarms or alarm signal lines to the fire station
to these contacts. The maximum load for each contact is 30 W at 24 V.
➮
The black jumpers (1), (2) and (3) behind the associated contact terminals
configure the contacts as make (NO) or break (NC) contacts.
Installing the "Alarm Contacts"
daughter card
1. Switch off the mains and remove the battery fuse.
The system is now off the circuit and de-energised.
2. Open the case.
3. Insert four spacers (2) into the holes in the main circuit board.
4. Push the "Alarm Contacts" daughter card (1) onto the spacers.
Jumper
Position
Function
(1)
left
Alarm contact acts as make (NO) contact.
(1)
right
Alarm contact acts as break (NC) contact.
(2)
left
Window Open contact acts as make (NO) contact.
(2)
right
Window Open contact acts as break (NC) contact.
(3)
left
Fault contact acts as make (NO) contact.
(3)
right
Fault contact acts as break (NC) contact.
7
6
5
4
3
2
1
9
3
2
1
1 2 3
1
2
