www.geyserwise.co.za
32
PV System Installers Guide
___________
Connection of MPPT controller
Setting Voltages on MPPT
Use the key supplied to adjust the voltages on the MPPT
Expected multi-meter Readings
DC Voltage from PV Panels
DC Current Amps to Element
DC Current Amps to Element PV
MPPT setting
100L:
Set at 65V (2 x 250W panels in series)
150L:
Set at 100V (3 x 250W panels in series)
200L:
Set at 110V (3 x 300W panels in series)
Adjust the pod until the heating light comes on.
All equipment must be installed inside or inside an
appropriate water proof box.
Please take all voltage and ampere readings
before leaving the installation site. If you are
unsure as to what the values should be for
your particular installation please contact our
office for advice.
