30
Operation
Gewiss
This station has a keypad set for the purpose of accessing the
different menus of its firmware.
The following points indicate the procedures that must be carried out to
start and end the charging process.
There are two options in order to carry out the charge:
•
Immediate charge.
•
Deferred charge (in order to use this option it must be enabled
in the station).
The charging process is slightly different depending on the charging
process selected.
Immediate charge
When choosing this option, the charge begins when the vehicle is connected to the station.
Starting the charge process
1. Check that the station is in the
awaiting vehicle
status, showing the following two screens alternately:
2. Press
to access the language selection menu for the charging session. Once the charging process ends
the default language of the station will be enabled.
LANGUAGE
ENGLISH
LANGUAGE
ENGLISH
After accessing the language selection menu browse
through the options by pressing
or
.
Select the required language and press
.
3. Identify the card using the reader under the display. When the station reads the card correctly a menu will
be displayed to select the charging process or to cancel the process.
ABA2023IQM01_ - 7.55.4.412.2 - Installation and Operation Manual
ABA2023IQM01_ - 7.55.4.494.0
ABA2023IQM01_ - 7.55.4.494.0
