Gewiss CHORUS GWA9531, Technical Manual

Page: 16 / 57

16
4.2.1 Follow-up time parameter
The follow-up time determines how long the lighting remains on after the last detected
movement. Each new movement restarts the follow-up time. Follow-up time is set under
“Follow-up time in seconds”, “Follow-up time in minutes” and “Follow-up time in hours”, and
is produced by adding these three times.
With fluorescent lamps, a follow-up time of at least 10 minutes is recommended, to increase
the lifespan of the lamp.
The shortest follow-up time is approx. 100 ms (input of 0/0/0).
The occupancy detector follow-
up time can be changed via the “Follow-up time in minutes
– Input – Light output” communication object and/or by remote control.
The communication object is a 2-byte object. Follow-up time is given in minutes.