USER INSTRUCTIONS
50
It is possible to temporarily force the active temperature set point in Economy, Precomfort
and Comfort operation modes by using the
keys to set the required value. Confirm
the value by pressing the
key or waiting for 5 seconds.
The
,
or
will flash on the display to indicate
that the forcing is enabled.
If it is in SLAVE control mode, the variation in the
temperature set-point is limited to ± 3 °C and remains
active until it receives a new mode command from the
Master device.
Press the FAN and SET keys together for 2 seconds, when the device is powered by the
bus, to reset the thermostat.
Warning: all the previously set parameters will be cancelled.
When it is turned back on, the thermostat will use the default factory settings.
The thermostat goes into heating in OFF mode.
Reset and restore of default settings
Temporary temperature forcing
Summary of Contents for Chorus GW 10 763
Page 2: ......
