36
ENGLISH
ASSEMBLY INSTRUCTIONS
DP300G
3
ASSEMBLY INSTRUCTIONS
DP300G
This section tells you how to correctly set up your digital piano. For assembly you will
need:
• A size 2 phillips screwdriver
• Another person
Do not tighten the phillips screws until all parts of your digital piano have been pre-
assembled and aligned.
How to assemble your digital piano:
1. Unfold the pedal cable (not shown) and screw the adjustment screw ( 10 ) into the
pedal board ( 3 ).
2. Connect the side panels (4 and 5) with the pedal board using the phillips screw (7b)
3. Attach the rear panel ( 2 ) with the 4 phillips wood screws ( 8a ) to the pedal board. Then
connect it to the side panels by using the phillips screws ( 8b ).
4. Then you can place the keyboard on the top. Ensure that it is fitted to the metal angle of
the side panels. 4 phillips screws (7a) must be screwed into the keyboard from below.
5. Then align your digital piano and tighten all of the screws.
NOTE
6. Place your digital piano at the desired location and make sure that the adjustment
screw ( 10 ) touches the floor as shown below.
