20
19
Wipe Steam wand ⓰ ：
Wipe the Steam wand ⓰ Arm & froth nozzle
⓱ with a clean damp cloth to remove any m-
ilk residue.
Tap & Swirl the Pitcher ：
Gently tapping the Pitcher on the benchtop
helps to release larger trapped air bubbles.
Swirling helps the milk & froth to combine for
an even consistency & a silky appearance.
（1）After making the froth milk through the
steps above, if you want to continue to
brew coffee, by press the single cup button
❷ or double cup button ❸.
（2）You will find the high-temperature status.
Then the appliance will show you the single
cup button ❷ and double cup button ❸
are blinking blue light quickly, and the
power button ❶ is blinking red light quickly
It is necessary to cool down the machine
firstly. Then we could continue to brew
espresso.
Note:Above recommendations might vary from one milk
brand to another and depending on your taste preference.
Note:If steam function is being used for more than 5 minutes,
the Power button ❶ blinks red light quickly, and the steam butt-
on ❹ blinks white light quickly. Thus, reset steam/water knob
⓮ to horizontal position (off-position) to stop it.
After the milk increase in volume by two
times or your required purpose is reach-
ed, you can turn the steam/water knob ⓮
to horizontal position(off-position). The
Single/short cup button ❷ and Double/l-
ong cup button ❸ do not light up. Beca-
use the appliance is in steam function, if
you want to go to standby mode, press st-
eam button ❹ , Single/short cup button
❷ or Double/long cup button ❸ to exit.
Press the Power button❶ , the appliance
has no any response.
MAKE ESPRESSO IMMEDIATELY AFTER FROTHING MILK
Purging the Steam wand ：
The Finishing Touches：
Pour from the Milk Pitcher into your cup in one steady motion.
Note:If there is no operation after 5 minutes, the appliance
will pass to sleep mode.
