background image

26

25

2. When the water tank ⓰ is 

pulled up after use, it is nor-

mal that there will be water 

left on the desk.

3. The sealing ring of the wa-

ter inlet hole of the machine 

base is deformed.

4. Malfunction of the coffee 

maker.

1. No proper clean after cle-

aning the mineral deposits.

2. Coffee powder is stored in 

a hot and humid place for a 

long time. The coffee powder 

turns bad.

Please contact with the aut-

horized service facility for 

assistance.

Please contact with the aut-

horized service facility for 

assistance.

Clean the coffee maker per 

the instructions “BEFORE 

FIRST USE OR A LONG TIME 

NOT USE ” for several times.

Keep the unused coffee 

powder in a cool, dry place.

After opening a package of 

coffee powder, reseal it tightly 

and store it in a refrigerator to 

maintain its freshness.

Acid (vinegar) 

taste exists in 

Espresso cof-

fee.

As the water outlet at the b-

ottom of the water tank ⓰ 

is a movable part and it is 

Not leaking. If there is water 

left on the water outlet at 

the bottom of the water tank 

⓰, please clean all the water 

around the water outlet with 

a dry rag before put the water 

tank ⓰ on the back of coffee 

maker again.

The power outlet is not plu-

gged well.

The coffee maker 

cannot work.

Plug the power cord into a 

wall outlet correctly, if the 

appliance still does not work, 

please contact with the aut-

horized service facility for 

assistance.

The hole of the froth nozzle 

is blocked.

1. The heating indicator ❸ is 

not illuminated.

No steam comes 

out when make 

milk froth.

Can't make milk 

froth.

The coffee maker 

make weak coffee

Use a cleaning pin to insert 

the hole of the froth nozzle 

to clean and unblock the 

steam pipeline.

Only after the heating indi-

cator ❸  is illuminated, the 

steam can be used to froth.

2. The temperature of the 

milk is inappropriate.

The milk temperature is 

about 41-45℉.

6. There is some dirt inside 

the steam wand ⓫  .

1.The coffee bean is inappro-

priate.

Use blend coffee bean.

2. The grounds particle size 

is coarse.

Use fine grounds.

Clean the Steam wand ⓫ 

immediately after use every 

time with wet sponge.

4. The quantity of milk is 

inappropriate.

Use 100mL milk for each 

frothing.

5. The size of pitcher is inap-

propriate.

Using correct size pitcher.

3. Use skim milk.

Use whole milk or semi-

skimmed milk.

3. The grounds amount is 

inappropriate.

A spoon of flat coffee powder 

is approximately equal to 7g. 

Collect the coffee powder 

with the spoon and shake it 

gently to make the surface 

flat, the amount of coffee 

powder is around 7g. With 

one spoon coffee powder 

( 7g ) can brew one cup of 

top-grade coffee, while two 

spoons (14g) is two cups of 

top-grade coffee.

Problem

Possible Cause

Solution

Problem

Possible Cause

Solution

Summary of Contents for GECME400BA-U

















Reviews: