Problem
Possible Cause
Solution
Only after the Manual dose
button❶/single cup button
❷/double cup button ❸ is
long on, the steam can be
used to froth.
The milk temperature is about
41-45℉.
1. Manual dose button ❶/single
cup button ❷/double cup button
❸ is a flashing light.
2.The temperature of the milk
is inappropriate.
Use whole milk or semi-
skimmed milk.
Clean the steam nozzle imm-
ediately after use every time
with steam valve⓮/steam
wand ⓯.
3.Use skim milk.
4.There is some dirt inside the
steam valve ⓮ /steam wand ⓯.
Can't make milk
froth.
No clean correctly after clean-
ing mineral deposits.
Clean coffee maker per the
content in“ before the first
use” for several times.
Please use fresh coffee powder,
or store unused coffee powder
in a cool, dry place. After ope-
ning a package of coffee powder,
reseal it tightly and store it in a
refrigerator to maintain its fres-
hness.
The coffee powder is stored
in a hot, wet place for a long
time. The coffee powder turns
bad.
Plug the power cord into a
wall outlet correctly, if the
appliance still does not work,
please contact with the auth-
orized service facility for repare.
The power outlet is not
plugged well.
Acid (vinegar)
taste exists in
Espresso cof-
fee.
The coffee maker
cannot work any
more.
Do not take apart the appliance by yourself if the cause of failure is
not found, it’s better to contact certified serving center.
9. TROUBLE SHOOTING
1. There is much water in the
drip tray ❾.
Water leaks from
the bottom of
coffee maker.
Please clean the drip tray ❾.
As the water outlet at the bot-
tom of the water tank ⓬ is a
movable part and it is Not
leaking.
Problem
Possible Cause
Solution
2. When the water tank ⓬ is
pulled up after use, it is nor-
mal that there will be water
left on the desk.
Please contact with the auth-
orized service facility for assis-
tance.
3. The sealing ring of the water
inlet hole of the machine base
is deformed.
Please contact with the auth-
orized service facility for
assistance.
4.The coffee maker is malfu-
nction.
26
25
