18
17
（1）Uninstall the portafilter ❻ in parallel
from the coffee outlet from the lock dire-
ction “ ” to “ ” , then put it
down. Pour away the coffee powder.
（3）Press any button. (Manual dose button
❶ or Single cup button ❷ or Double cup
button ❸) The corresponding light will be
illuminated. The water will come out and
flush out the coffee powder inside.
（2）Turn the Espresso/Steam knob ⓭ to
the espresso function icon.
6.2.4 HOW TO CLEAN THE SEAL RING
Note: (Please mind the hot water and operate carefully)
As the seal ring of the water outlet is designed to prevent from
leaking, once there is too much coffee powder left, the seal ring
will be blocked. If the seal ring is blocked, it will lead to the esp-
resso leakage or splash when brewing espresso. For this reason
and for healthier, we suggest you to clean it immediately with
hot water from the brewing function. If it is not cleaned in time,
it will produce a bad smell.
After making the espresso through the steps above (6.2 HOW TO MAKE
ESPRESSO), you can continue to froth milk, please refer to the following
steps (6.3 HOW TO MAKE MILK FOAM).
For a better taste and good for your health, we suggest you to rinse
the pitcher and release some water out from the steam wand ⓳.
6.2.5 FROTH MILK AFTER BREWING ESPRESSO
6.3.1 THE STEP OF OPERATION
6.3 HOW TO MAKE MILK FOAM
（1）Take the cup under the steam wand
⓯. Rotate the steam control knob ⓭ to
the steam function icon for 10 seconds,
there will be water coming out from the
steam wand ⓯. Be careful of the hot ste-
（4）Rotate the Espresso/Steam knob ⓭
back to off-position.
（5）Rinse the seal ring of the water outlet
with cloth.
