Gas & CO jelzőkészülék
97
H
4 Installation
WARNING
Explosion, Electric shock!
Drilling work can damage lines in wall mounting.
►
Pay attention to lines lying in the wall that carry electricity, gas
or water and do not damage them!
CAUTION
Stumbling, Fall
Cables can be overlooked.
►
Lay the power cable in such a way that it does not hinder anyo-
ne or damage anything.
• When using in mains operation, select the mounting location in such a way that
an easily accessible socket is easily reached.
• In general, choose the mounting location in such a way that other furniture or
device parts are not limited in their use and the laying of the power cable poses
no risk of accident
4.1 Assembly when using heavy gas
1. Drill 2 mounting holes at a distance of 35 mm at a suitable position shown
below.
2. Insert the dowels into the drilled holes.
3. Screw the wall bracket into the dowels using the 2 screws.
If you would like to operate the device with an emergency battery, read the chapter
„Inserting the battery, changing the battery“ before final assembly.
4. Hang the device on the hook of the wall bracket.
0.3-1.
0
3
Installation
place
