background image

16

-  This Certificate should be kept in a safe place and produced for verification should
technical assistance be required. Inability to produce this Certificate may affect your
warranty rights. Warranty period bengins from date of purchase and is valid for 12 months
(24 months for U.K.).
Should technical assistance be required during the warranty period, you should take
your vehicle and this Certificate to either the original installer or the nearest GT Auto
Alarm Service Centre for inspection. Should any part of the security system be found to
be defective, and providing all component parts of the system are of GT Auto Alarm
manufacture, the defective part will be replaced or repaired free of charge. Warranty
replacement/repair does not include the following items:

1

) damage caused in transit/carriage;

2

)damage caused by incorrect or poor installation; problems which may be caused by

anomalies in the vehicle’s electrical system or originating from the environment in which
the system is operated.

3)

 damage caused by carelessness, negligence, misuse or repair by unauthorised

personnel.
Units returned to our organisation under the terms of the warranty will be replaced or
repaired within a reasonable time period according to our Company requirements.
Any repair/refurbishment received within the warranty period does not extend or renew
the warranty itself.
Nobody is authorized to modify or replace anything in verbal or written format which
alters the conditions of this warranty.
The manufacturer reserves the right to modify or improve the specification.
The alarm only defects burglary attempts. Our company cannot accept liability for any
consequential damage or loss to persons or property as a result of purchase of a GT
Auto Alarm system.
Any correspondence for litigation purposes shall be received at our headquarters in
Gavirate (Varese) - Italy.

12.0 - WARRANTY CONDITIONS

CUT AND KEEP

CUT AND KEEP

ManInstGT916-UKRev01.p65

Installation Certificate

We certify that the alarm system installation  has been carried out
following  these fitting and that the technical data has been handed

over.

Warranty coupon

Alarm model

ALARM MODEL:

INSTALLATION DATE:

INSTALLED ACCESSORIES:

POSSIBLE INSTALLED

ACCESSORIES:

STAMP AND INSTALLER
SIGNATURE:

INSTALLATION DATE:

MAKE AND CAR MODEL:

STAMP AND INSTALLER
SIGNATURE

Summary of Contents for GT915

















Reviews: