Getinge Arjohuntleigh Akron Bobath 4, Instructions For Use Manual

Page: 10 / 32

AKRON 4411, 4412, 4421, 4422
7
6. Troubleshooting – Electric Actuator
Symptom Possible cause Action
Actuator will not work Power disconnected
Fuse blown
Hand/footswitch disconnected
Ensure mains supply is connected
Replace fuse in socket
Check that the hand/foot switch is
fully inserted into the actuator
If the problem persists consult your local Akron Supplier.
7. Maintenance
Check couch visually before use.
Carry out routine servicing every six months or more frequently if in heavy use.
Routine servicing or repair must only be performed by suitably qualified person.
Examine the couch for any signs of damage. Make sure that all nuts, bolts and other fasteners are tight.
Do not over tighten as this may cause binding.
Upholstery fasteners should be checked, tightened or replaced if necessary.
Check section hinge pins to ensure that no pin protrudes.
Check gas strut controls, throughout the full range of movement for locking and assistance.
Check hydraulic couches for smooth operation and signs of leakage.
Examine the flexible cables for cuts, abrasions, kinking or other deterioration and replace if necessary.
Ensure that the power supply connector plug is securely attached.
Check mains plug connections are tight and fuse is correctly rated (5A).
WARNING
Before commencing any maintenance activity, disconnect the couch from the
electrical supply. Plug acts as disconnect device.
WARNING
All electrical checks should be performed by a suitably qualified and licensed
electrician.
Neither BLUE or BROWN wires are to be connected to the earth terminal of a
three pin plug.