Getac K120 User Manual Download Page 27

Page: 27 / 119

Multiple Usage Modes

NOTE:

The Keyboard Dock can be purchased separately. Specific models

come with the Keyboard Dock.

With the Keyboard Dock, you can use K120 in different usage modes. (For

information on how to change modes, see “Changing Usage Modes” later.)

Usage Mode

Description

Notebook Mode

When the Tablet and Keyboard Dock are

assembled, the system works as a regular
notebook computer.

Tablet Mode

You can easily detach the Keyboard Dock and

leave it behind when you desire the portability

of the Tablet.

Convertible Mode

You can transform the system from notebook to

tablet and back again.
For the transformation, the Tablet has to be
detached, flipped over, and then reattached.

NOTE:

This mode is not supported if the high

capacity battery packs are installed.

Presentation Mode

When the screen faces outwards, you can use
the Keyboard Dock as a stand for the Tablet.

NOTE:

This mode is not supported if the high

capacity battery packs are installed.

Summary of Contents for K120
























































































































Search results

Summary of Contents for K120

Reviews:

Getac K120, User Manual, Page: 27 / 119

Search results

Summary of Contents for K120

Reviews: