Getac K120 User Manual Download Page 101

Page: 101 / 119

Using the Driver Disc (Optional)

NOTE:

You can download the latest drivers and utilities from Getac website

a 

Support

The Driver disc contains drivers and utilities required for specific hardware in

your computer.

Since your computer comes with drivers and utilities pre-installed, you

normally do not need to use the Driver disc. In case you want to manually
install Windows, you will have to install the drivers and utilities one by one

after installing Windows.

To manually install drivers and utilities:

Start up the computer.

Prepare an external CD/DVD drive (with USB connection). Connect the

drive to your computer. Wait for the computer to recognize the drive.

Insert the Driver disc. Make sure you use the disc that matches the
Windows version of your computer.

The autorun program should automatically start. You will see the

installation menu. Select

NEXT

to go to the next page if there is more

than one.

To install a driver or utility, just select the particular button and follow
the onscreen instructions to complete the installation.

Summary of Contents for K120
























































































































Search results

Summary of Contents for K120

Reviews:

Related manuals for K120

Brands by name

Popular brands

Getac K120, User Manual

Search results

Summary of Contents for K120

Reviews:

Related manuals for K120

Brands by name

Popular brands