Getac K120 User Manual Download Page 108

Page: 108 / 119

102

Canada

Canadian Department of Communications
Radio Interference Regulations Class B Compliance Notice

This Class B digital apparatus meets all requirements of the Canada

Interference-Causing equipment regulations.

Cet appareil numérique de Classe B respecte toutes les exigences du

Règlement Canadien sur le matériel brouileur.

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe B

prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.

ANSI Warning

Equipment approved for ANSI/ISA 12.12.01, Nonincendive Electrical

Equipment for use in Class 1, Division 2, Group A, B, C, and D.
Maximum ambient temperature: 40



WARNING:

To prevent ignition of a hazardous atmosphere, batteries

must only be changed or charged in an area known to be non-hazardous.



EXPLOSION HARZARD

WARNING:

External connections/hubs through the

connectors as mentioned (USB connector, Ethernet connector, phone
connector, video port, serial port, power supply connector, microphone

jack, headphones jack, and buttons/switches) and super multi DVD/combo
drive are not to be used in a hazardous location.



Power adapter shall not be used in hazardous locations.

Summary of Contents for K120
























































































































Search results

Summary of Contents for K120

Reviews:

Related manuals for K120

Brands by name

Popular brands

Getac K120, User Manual

Search results

Summary of Contents for K120

Reviews:

Related manuals for K120

Brands by name

Popular brands