Getac 320GOBI3 Page 74 User Manual Download | Manualshive

Page: 74 / 148

background image

4-12

Expanding Your Computer

Using ExpressCards

Your computer has an ExpressCard slot.

The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm
(ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very
extensive range of applications including memory, wired and wireless
communication cards, and security devices.

Shown next are the appearances of ExpressCards for your reference.

ExpressCard/54

ExpressCard/34

To insert an ExpressCard:

1.

Locate the ExpressCard slot on the left side of the compute Lift the latch
to open the protective cover.

2.

Slide the ExpressCard, with its label facing up, all the way into the slot
until the rear connectors click into place.

3.

Close the cover.

«
...
72
73
74
75
76
...
»

Summary of Contents for 320GOBI3





















































































































































Reviews:

No comments

Related manuals for 320GOBI3

Brand: Asus Pages: 108

Brand: Toshiba Pages: 258

Inspiron 14 5420

Brand: Dell Pages: 68

Brand: InfoCase Pages: 4

Brand: Prestigio Pages: 122

Brand: AIRIS Pages: 123

Brand: HYPA Pages: 8

Brand: Gateway Pages: 89

Brand: Gateway Pages: 67

nc6220 - Notebook PC

Brand: HP Compaq Pages: 226

Brand: IBM Pages: 168

ThinkPad X30, ThinkPad X31 (MT 2672

Brand: IBM Pages: 100

Brand: Oregon Scientific Pages: 25

Brand: ECS Pages: 87

Toughbook CF-U1AQB1G2M

Brand: Panasonic Pages: 96

5810T-8929 - Aspire Timeline - Core 2 Solo 1.4...

Brand: Acer Pages: 76

Aspire 5517 Series

Brand: Acer Pages: 11

Aspire 1420P Series

Brand: Acer Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands