background image

11

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC 

Rules Operation is subject to the following two 

conditions:
(1) This device may not cause interference; and
(2)  This device must accept any interference, 

including interference that may cause 

undesired operation.

This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection 

against harmful interference in a residential 

installation. This equipment generates uses 

and can radiate radio frequency energy and, if 

not installed and used in accordance with the 

instructions, may cause harmful interference 

to radio communications. However, there is no 

guarantee that interference will not occur in a 

particular installation. If this equipment does 

cause harmful interference to radio or television 

reception, which can be determined by turning 

the equipment off and on, the user is encouraged 

to try to correct the interference by one or more 

of the following measures: 
•  Reorient or relocate the receiving antenna.
•   Increase the separation between the 

equipment and receiver. 

•   Connect the equipment into an outlet on a 

circuit different from that to which the receiver 

is connected. 

•   Consult the dealer or an experienced radio/TV 

technician for help. 

This device meets the FCC requirements for RF 

exposure in public or uncontrolled environments.

CAUTION!  

Any changes or modifications not expressly 

approved by the party responsible for compliance 

could void the user’s authority to operate the 

equipment.

IC COMPLIANCE STATEMENT

This device complies with Industry Canada’s 

– exempt RSSs. Operation is subject to the 

following two conditions:
1  This device may not cause interference; and
2   This device must accept any interference, 

including interference that may cause 

undesired operation of the device.

Le présent appareil est conforme aux CNR 

d’Industrie Canada applicables aux appareils  

radio exempts de licence. L’exploitation est 

autorisée aux deux conditions suivantes :
1  l’appareil ne doit pas produire de brouillage;
2   l’utilisateur de l’appareil doit accepter tout 

brouillage radioélectrique subi, même si le 

brouillage est susceptible d’en compromettre  

le fonctionnement

The device meets the exemption from the routine 

evaluation limits in section 2.5 of RSS 102 and 

compliance with RSS-102 RF exposure, users can 

obtain Canadian information on RF exposure and 

compliance. 
Le dispositif rencontre l’exemption des limites 

courantes d’évaluation dans la section 2.5 de RSS 

102 et la conformité à l’exposition de RSS-102 rf, 

utilisateurs peut obtenir l’information canadienne 

sur l’exposition et la conformité de rf.

EU COMPLIANCE STATEMENT

GCC hereby declares that this wireless device is  

in compliance with the essential requirements and 

other relevant provisions of the R&TTE Directives 

1999/5/EC.

THE LEGAL STUFF

Summary of Contents for GCC Pulse













Reviews: