CAMERA TRACKING CONFERENCE SYSTEM
9
Chairman QTY: To set the limitation QTY for chairman unit.
Speaking QTY: To set the limitation for speaking units QTY.
Auto Off: To turn off the microphone automatically if the chairman or
delegate
in certain time. 0S means this function is
unavailable.
Time Off: to turn off the microphone compulsively by the set certain time.
is not operated
Click “back” to go back, click to go to next page as below:
Priority Tone: To play a tone when pressing the chairman priority button.
Priority Setup: Manual Recover, Auto Recover
Manual Recover: Delegate units will be off when pressing the chairman
priority once. Delegate units need to be turned on manually by pressing the
ON/OFF button.
Auto Recover: Delegate units will be off when long pressing the chairman
priority button. Delegate units will be on again when releasing the priority
button.
Card Meeting/Cardless Meeting: When the mic units adopt IC card port, this
is to set the requirement of meeting with IC card or not.
CAMERA TRACKING CONFERENCE SYSTEM
10
Click “back” to go back, click to go to next page as below:
Control Unit
All Unit: This is to control all the unit in the main controller.
Off: Turn off all the units.
On: Turn on all the units(Note: this can only be carried out under “All On
Mode”.
Certain Unit: Turn on/off a certain unit by the related unit number.
Certain Unit Addressing: Addressing for additional unit. For example, when
there are 100 units for the system, input “101” & connect a new unit to the
system then click
"
Setup". The new unit address will be “101” accordingly.
Note: All the units' cables must be disconnected when setting.
All Unit Addressing: Addressing all unit by entering a starting number. For
instance starting from number 1,click “setup”, by pressing the turn on button
on each unit, the units will be set in default subsequent number. The first one
is unit number 1, followed by unit number 2, unit number will increase in an
ascending order till all units are set, and reboot main controller.
(Normally
the process of unit addressing will be done prior to meeting)
