24
DANGER
Personnel working on pipes are exposed to
safety risks and may suffer severe injuries,
poisoning or even loss of life.
Make sure that no hot or hazardous
fluid is in the equipment or the pipes.
Make sure that the pipes upstream
and downstream of the equipment are
depressurised.
Make sure that the installation is
switched off and protected against
unauthorised or unintended activation.
Make sure that the equipment and the
pipes have cooled down to room
temperatures.
Wear protective clothing that is
suitable for the fluid and, if necessary,
wear protective gear.
For more information on suitable protective clothing
and safety gear refer to the safety data sheet of the
fluid in question.
DANGER
Risk of bruises when working on the
equipment during operation.
Switch off the equipment if you have
to work close to any moving
equipment parts.
Make sure that the equipment cannot
be switched on inadvertently.
Attention!
Damage to the equipment due to improper
maintenance work.
Make sure that only qualified
personnel performs maintenance
work.
A qualified person must be acquainted with and
experienced in the following:
Working on pressure equipment
Lifting loads
Assembling and disassembling the equipment
The qualified personnel must observe and follow
the instructions given in this operating manual
and in the applicable documents.
Summary of Contents for ZK 29
Page 1: ...Control Valve ZK 29 Original Installation Instructions 810685 05 ...
Page 58: ...58 ...
Page 59: ...59 ...