24
If faults occur during the test procedure one of the
following messages will be indicated:
Message
Description
Abort!
The test was stopped by touching the "Back" button.
Repeat the test.
Error!
An error occurred during the data transfer from the Com Box.
Check the Bluetooth connection shown on the display. Check
the connecting cable of the measuring probe. Repeat the test.
Should this error occur again have all equipment components
tested by the manufacturer.
Check sum!
A check sum error occurred during the data transfer from the
Com Box.
Check the Bluetooth connection shown on the display. Check
the connecting cable of the measuring probe. Repeat the test.
Should this error occur again have all equipment components
tested by the manufacturer.
Tip without contact
During the test the sensor tip was lifted off and lost contact with
the test object. As a result the test was interrupted. Press the
sensor tip firmly onto the test object. Continue the test.
Timeout!
Timeout occurred during the data transfer from the Com Box.
Check the Bluetooth connection shown on the display. Check
the connecting cable of the measuring probe. Repeat the test.
Should this error occur again have all equipment components
tested by the manufacturer.
...awaiting VKPS data
The sensor tip does not have contact with the test object.
Testing has not yet started. To start the test firmly press the
sensor tip onto the test object.
To repeat the test touch the "Repeat" button .
To save the test result in the data collector
touch the "Save"button.
A green check mark indicates that the respective
steam trap has been tested.
To return to the main menu without saving the
test results touch the "Back" button .
