35
Detach the end connections of the equipment
from the pipes.
Put the equipment onto a suitable base.
Store the equipment as described on page 11.
Re-using equipment after storage
Observe the following instructions if you want to
remove the equipment and use it again somewhere
else:
Make sure that the equipment is free of any
fluid residues.
Make sure that all connections are in good
condition and leak-free.
If necessary re-work welded connections in
order to ensure that they are in good working
condition.
Use the equipment only for its intended purpose
and the service conditions for which it was
specified.
Summary of Contents for UNA 46
Page 26: ...26 UNA 45 with cover for installing electrodes ...
Page 28: ...28 UNA 45 with sightglass cover ...
Page 50: ...50 ...
Page 51: ...51 ...
