26
Annex
- continued -
Setting Node ID
- continued -
Node ID
95
S1
ON
1
S2
ON
2
S3
ON
4
S4
ON
8
S5
ON
16
S6
OFF
32
S7
ON
64
(Factory setting)
D
Toggle switch, white
Fig. 11
Do not use a node ID for more than one item of equipment in the CAN bus system.
The node ID 0 is not permissible.
Attention
Danger
The terminal strips of the control unit TRS 5-40 are live during operation.
This presents the risk of severe cases of electric shock!
Always
cut off power supply
before mounting, removing or connecting the terminal
strips!
Decommissioning
First detach the terminal strips. For this purpose turn the right and left fixing screws in direction of the
arrow until the terminal strip can be detached.
Undo the fixing slide in order to snap out the controller and take it off the supporting rail.
Disposal
Dismantle the control unit and separate the waste materials, using the specifications in the table
“Materials” as a reference.
Electronic component parts such as the circuit board must be disposed of separately!
For the disposal of the control unit observe the pertinent legal regulations concerning waste disposal.
