background image

 

 

 

   

Information on property damage or 

malfunctions 

Typographic features of warning 

notes 

 

Malfunctions will occur if the equipment is 
installed in a wrong position or with the flow 
pattern in the opposite direction of the fluid flow. 
This may result in damage to the equipment or 
the installation. Make sure that the flow pattern 
indicated in this installation and operating 
manual matches the direction of the fluid flow in 
the pipe. 

 

DANGER 

Notes with the heading DANGER warn 
against imminent dangerous situations that 
can lead to death or serious injuries. 

  

 

CAUTION 

Notes with the heading CAUTION warn 
against dangerous situations that could 
lead to minor or moderate injuries. 

 

If the material is unsuitable for the fluid, 
increased wear may occur and fluid may 
escape. Make sure that the material is suitable 
for the fluid used in your installation. 

Qualification of personnel 

  

Formatting features for warnings 

of property damage 

A qualified person must be acquainted with and 
experienced in the following: 

 

the pertinent on-site rules and regulations for 
preventing fire and explosions 

 

Attention! 

This information warns of a situation 
leading to property damage. 

 

working on pressure equipment 

 

making pipe connections 

 

working with dangerous (hot or pressurized) 
fluids 

  

Description 

 

lifting and transporting loads 

 

observing all notes and instructions in this 
installation & operating manual and the 
applicable documents 

Scope of supply and equipment 

specification 

  

Protective gear 

Scope of supply 

The required protective gear depends on the types 
of fluid used and the regulations on site. For more 
information on suitable safety clothing and safety 
gear refer to the safety data sheet of the fluid in 
question. 

Our equipment is delivered packed and ready for 
assembly. 

  

Equipment specification 

  

The equipment features the following connections: 

Protective gear comprises the following items: 

 

Connection for steam or air inlet 

 

protective helmet 

 

Connection for steam or air outlet 

 

work boots 

 

Connection for condensate outlet 

 

industrial leather gloves 

 

Vent (nominal size 200 upwards) 

  

  

Summary of Contents for TD

















Reviews: