GESTRA SPECTORcontrol II, Original Installation Instructions

Page: 19 / 28

19
Operating SPECTOR control
Note
To operate the SPECTOR control press on the respective buttons or use swipe gestures.
Buttons and their description
Button Description
Home : Press this button to go to one of the startup pages (1..4).
To define the startup page go to: System/Backlight - Startup Page…/ . If there
is no user response within 60 minutes the system returns automatically to the
startup page.
Alarm:
The symbol is flashing if an alarm has been triggered. Press this button
to view the alarm list. If the alarm has stopped but has not been reset the button
remains highlighted. To sort the list entries press the yellow title bar. To view the
signal name shown at the bottom press one of the lines.
Back:
Press this button to leave or close this page.
Delete:
Press this button to delete signals, lists etc. You will receive a confirma-
tion message on which you need to press “OK”.
Save: Press this button to save the lists (e. g. flowrate or alarm) stored on the CF
card in the equipment under [StorageCard]/Data..
Setup: Press this button to customize values, signals and page settings.
Displays: Press this button and leave it depressed for more than 1 sec. to view
the content of a detailed operating manual.