17
LRS 1-50 - USA - Installation & Operating Manual -
850704-01
Installing the LRS 1-50 conductivity switch
The LRS 1-50 conductivity switch snaps onto a TH 35, EN 60715 support rail
in a control cabinet.
Fig. 2
4
DANGER
There is a risk of electric shock during work on electrical systems.
■
Switch off the voltage to the plant before you install the equipment.
■
Check that the plant is not carrying live voltage before commencing work.
1.
Switch off the voltage to the plant and secure any surrounding equipment in the control cabinet
that is live, so it cannot be touched.
2.
Carefully press the unit onto the support rail until the holder clips into place
.
