GESTRA KH, Original Installation Instructions

Page: 8 / 16

8
➢ Make sure that all these requirements are
always met when storing the unit.
➢
Please contact the manufacturer if you
cannot comply with the recommended
storage conditions.
Transporting the unit
DANGER
Risk of bruises if the unit or component
parts fall down.
➢ Use suitable lifting gear when
moving or lifting the unit and/or
component parts.
➢ Make sure that the unit cannot
topple over.
➢
Make sure that nobody is standing
below the lifted unit.
➢
For devices weighing about 25 kg or more,
you need support from a second person or
a suitable hoist.
The exact weight of unit from which
support is required depends on your
physical abilities and local regulations and
conditions.
➢
Meet the requirements for storage also
when transporting the unit.
➢ Prior to transport seal off connections with
sealing plugs.
If you do not have the sealing plugs
supplied with the unit use
appropriate seal caps to seal off the
connections.
➢
For short distances (only a few metres) you
can transport the unit unpacked.
➢ When transporting the unit over larger
distances use the original packaging.
If you do not have the original packaging
use a box that protects the unit adequately
against corrosion and physical damage.
For a short period of time the unit
may be transported even if the
temperature is below 0 °C,
provided that the unit is completely
empty and dry.
Preparing installation
DANGER
Risk of bruises if the unit or component
parts fall down.
➢ Use suitable lifting gear when
moving or lifting the unit and/or
component parts.
➢ Make sure that the unit cannot
topple over.
➢
Make sure that nobody is standing
below the lifted unit.
➢
Take the unit out of the transport
packaging.
➢ Check the unit for transport damage.
➢ Contact the manufacturer if you detect any
kind of shipping damage.
When supplied by the factory, the connections
may be sealed off with sealing plugs.
➢ Remove sealing plugs before mounting the
unit.
➢
Keep the sealing plugs and the packing for
further use.
Mounting and connecting the unit