GESTRA Gestramat CW 41, Original Installation Instructions

Page: 25 / 40

25
Removing the double cone
CAUTION
Risk of injury from lid under spring
pressure.
 Before unscrewing the hex nuts,
reduce the spring tension in the
equipment by slackening the setting
screw and adjuster.
 Completely unscrew the setting screw (7).
 Unscrew the adjusting key (21) out of the
adjuster completely.
The spring tension in the equipment has now been
reduced, and you can take off the lid.
 Slacken the four hex nuts (31) in the body
evenly crosswise.
The lid (1) lifts off due to spring tension.

Remove the hex nuts.
 Remove the lid from the body.

Remove the body gasket (2).

Dispose of the body gasket in accordance with
regulations at the location of use.

Take the spring (3) out of the body.