Gestetner CS555, Copy Reference Manual

Page: 45 / 194

Copying
32
2
BBBB
Press [ Edit / Color Creation ] .
CCCC
Press [ Color Creation ] .
DDDD
Press [ Convert Color ] .
EEEE
Select any one item from [ Conver-
sion 1 ] to [ Conversion 4 ] .
FFFF
Select the color to be converted.
GGGG
Select the new color to be convert-
ed.
Note
❒
You can adjust the density of
each color in 4 levels.
❒
When you want to change the
converted color, press from
[ Conversion 1 ] to [ Conversion 4 ]
and make the selection again.
❒
When changing between more
than two colors, repeat steps
E
to
G
.
Selecting from [ User Color ]
A
Press [ User Color ] .
B
Select from the registered col-
ors, then press
[ OK ] .
HHHH
After selecting all the colors to be
converted, press
[ OK ] .
IIII
Press [ OK ] three times.
JJJJ
Place the originals, and then press
the
{{{{
Start
}}}}
key.
Erase Color
You can erase a certain color in the
image of the original.
Note
❒
It is possible to select up to 4 colors.
❒
The width of the color to be delet-
ed can be adjusted in 5 levels. If the
color width is set to “Wider” and
red has been specified, colors
which are close to magenta or or-
ange, will also be deleted. The col-
or width can be adjusted in the
“User Tools”. See p.155 “Color
Sensitivity”.
AAAA
Press [ Edit / Color Creation ] .
BBBB
Press
[ Color Creation ]
.
CCCC
Press [ Erase Color ] .
DDDD
Select the color to be erased.
Note
❒
You can cancel the selection by
pressing the selected (highlight-
ed) key.
❒
You can erase 4 colors at once.
EEEE
Press [ OK ] after selecting all the
colors to be deleted.