Gestetner CS555, Copy Reference Manual

Page: 120 / 194

Using Connect Copy
107
4
❒
When the number of originals
or copies is small, copying will
be done on only the main ma-
chine.
FFFF
Press the
{{{{
Start
}}}}
key on the main
machine.
Copying starts on the main ma-
c h i n e a f t e r t h e o r i g i n a l s a r e
scanned.
Copying starts on the sub-machine
when data transfer from the main
machine is completed.
Placing originals on the exposure
glass
A
Place the next original when
the machine has finished scan-
ning the first one. Press the
{{{{
Start
}}}}
key.
B
When all the pages have been
scanned, press the
{{{{
#
}}}}
key.
Note
❒
If the machine is not in use, it
will begin copying.
Using Batch mode
A
Place the originals and press
the
{{{{
Start
}}}}
key.
B
After the first set of originals
has been fed, place the next set.
Note
❒
The next set of originals must
be set while the Auto Feed
indicator is lit.
❒
To stop scanning or copying,
press the
{{{{
Clear/Stop
}}}}
key on
the main machine, and then
follow the instructions on the
display.
Reference
p.15 “Batch”
C
Collect your copies from both
the main and sub machines.
Note
❒
The number of copies might
differ on the main and sub
machines.
❒
Both machines may not fin-
ish copying at the same time.
❒
When using the Sort/Staple
function, copying is divided
between the two machines
by the number of sets. If a pa-
per misfeed occurs when
processing a set of copes, it is
not possible for the other ma-
chine to take over the re-
mainder of that particular
set.
- - - -
Order of Copy Output
❖ ❖ ❖ ❖
When copying with the Sort/Staple
function
(Example) Copying 6 sets of a
three-page original
1.
Main machine
2.
Sub-machine
Copies are delivered face-down on
both the main and sub machines.
When using the Sort/Staple func-
tion, the processing of one copy set
cannot be divided between the two
machines.
AFU034S