Gestetner Aficio MP 7500 S/P, Printer Reference

Page: 23 / 158

15
Setting Custom Size Paper Using the Control Panel
Follow the procedure below to set the machine using the control panel when
loading custom size paper onto the bypass tray.
Important
❒
The following procedures are not required if you select [ Driver / Command ]
from
[ Bypass Tray Setting Priority ]
in
[ System ]
of
[ Printer Features ]
(see “Printer
Features”, General Settings Guide). In that case, set the paper size using the
printer driver.
❒
If you select [ Machine Settings ] from [ Bypass Tray Setting Priority ] in [ System ] of
[ Printer Features ]
(see “Printer Features”, General Settings Guide), the settings
made using the control panel have priority over the printer driver settings.
❒
If the printer driver is not used, select [ Machine Settings ] from [ Bypass Tray Set-
ting Priority ] in [ System ] of [ Printer Features ] (see “Printer Features”, General Set-
tings Guide). Set paper size using the control panel.
A
Press the
{
User Tools/Counter
}
key on the control panel.
B
Press [ System Settings ] .
C
Press the [ Tray Paper Settings ] tab.
D
Press [ Printer Bypass Paper Size ] .
E
Press [ Custom Size ] .
If a custom size is already set, press [ Change Size ] .
F
Press [ Vertical ] , enter the vertical size of the paper using the number keys,
and then press the
{
q
}
key.
G
Press
[ Horizontal ]
, enter the horizontal size of the paper using the number
keys, and then press the
{
q
}
key.
H
Press [ OK ] .
The paper sizes entered are displayed.
I
Press the
{
User Tools/Counter
}
key.
The initial screen appears.
Note
❒
When loading OHP transparencies or thick paper, set paper size and paper
type.
❒
For printer driver settings, see the printer driver Help.