Gestetner 3687, Operator'S Manual

Page: 84 / 191

Saving Energy With The Power Saving Timer
71
4
Saving Energy With The Power Saving
Timer
You can set sleep time to let the ma-
chine go to saving energy condition
and set the wake up time when it re-
turns to standby mode the next morn-
ing. During this Power Saver mode, a
fax message received is stored in the
memory and will be printed automat-
ically the next morning after the wake
up timer is activated.
As a typical example, you could pro-
gram the heating element inside the
printer to stay off at night and over
the weekend. (You can program dif-
ferent settings for every day of the
week.)
To use the Power Saving timer, you
must:
• Program the timers for each day of
the week.
• Switch the Power Saving timer fea-
ture on.
Setting the Power Saving time
( Function 71 )
Note
❒
While the Power Saving timer is
active, all incoming calls are re-
fused if the memory fills up.
- - - -
Example:
For Tuesday, set the Power Saving
timer to switch the heater on at 9 am
and off at 6 pm.
A
Press the
{{{{
Function
}}}} {{{{
6
}}}}
then enter
access code
{{{{
2
}}}} {{{{
2
}}}} {{{{
2
}}}} {{{{
2
}}}}
. Then
press
{{{{
7
}}}} {{{{
1
}}}}
and the
{{{{
Yes
}}}}
key.
SET TIMER Y/N/hi
SUN
B
Use
W
W W
W
and
V
V V
V
to scroll through the
days of the week.
SET TIMER Y/N/hi
TUE
Note
❒
Example: Press
V
twice to go to
Tuesday.
C
Press the
{{{{
Yes
}}}}
key
TIMER#1 TUE */#/Y
ON FROM 12:00AM
D
To change the ON to OFF, or the
other way round, press the
{{{{
*
}}}}
or
{{{{
#
}}}}
keys.
Note
❒
There are two timers for each
day, each with an ON/OFF set-
ting. “ON” means that the heat-
er will switch on at the time
indicated. “OFF” means that the
heater will switch off at the time
indicated.
E
Press
V V V V
to move the cursor under
the time.
TIMER#1 TUE */#/Y
ON FROM 12:00AM