Gesipa TAUREX 1 Axial, Operating Instructions Manual

Page: 15 / 160

15
GB
4. Working range
Tool type
TAUREX 1
Axial
TAUREX 2
Axial
TAUREX 3
Axial
TAUREX 4
Axial
Standard blind rivet Ø (mm)
2.4 - 3.2 up to 5 up to 6.4 up to 6.4
All materials
up to 4 Al/steel up to 6 Al/steel - up to 8 Al
Max. mandrel Ø (mm) 2.5 3.2 4.5 4.5
• The blind rivet setting tool should always be disconnected from the compressed air sys -
tem when carrying out maintenance work and when the tool is not in use.
• Always wear protective goggles when working with the blind rivet setting tool. Personal
protective equipment such as protective clothing, gloves, safety helmet, non-slip foot
-
wear, ear protection and fall arresting device is recommended.
• Do not exceed the permitted working pressure.
• When putting down the blind rivet setting tool, make sure that it cannot fall.
• Repairs must be carried out only by skilled personnel. In case of doubt, always send in
the complete (not disassembled) blind rivet setting tool to the supplier or to GESIPA
®
.
• Dispose of the used hydraulic oil in accordance with valid environmental protection
regulations.