15
1. Overview
(See images 1 - 4)
2.
Blind rivet nut gun FireFox
®
2
The Blind rivet nut gun is designed exclusively
for setting blind rivet nuts and blind rivet nut
studs as described in the operating instructions.
Please comply with all safety instruc-
tions!
2.1 Correct use
The Blind rivet nut gun must only be used for setting
of blind rivet nuts and blind rivet nut studs.
Improper use during winding down and setting
of nuts poses a risk of crushing your fingers!
Do not overstrain the Blind rivet nut gun; work
within the specified range of capacity.
Do not exceed permitted operating pressure.
Do not rivet without joint material.
Check connecting lines for compressed air at
regular intervals for force fit and tightness.
Disconnect the device from the compressed air
network prior to carrying out any maintenance
work to the Blind rivet nut gun, changing threa-
ded mandrels or when not in use.
Wear safety goggles at all times when working
with the Blind rivet nut gun. We recommend
the use of personal safety equipment, such as
protective clothing, gloves, safety helmet, ear
protection and anti-fall protection.
When putting down the Blind rivet nut gun, se-
cure it against falling.
Repairs must only be carried out by qualified
staff. Use genuine parts for repair at all times. If
in doubt Blind rivet nut gun should be returned
in original tamper free condition to the supplier
or GESIPA
®
.
Avoid excessive contact with hydraulic oil. If
irritation of the skin occurs, wash affected skin
parts thoroughly with water!
Dispose of hydraulic waste oil according to
current regulations.
2.2 Safety instructions
The blind rivet nut gun is designed for setting
blind rivet nuts and blind rivet nut studs M3 to
2.3 Working environment
M12 made of any kind of material.
41303013_Gesipa_FireFox2_160413.indd 15
16.04.2013 13:39:32
